Barco HDF-W30LP, User And Installation Manual

Page: 166 / 311

15. Layout
How to resize
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Layout → PiP window → Size .
Image 15-18
PiP window, size
2. Press ENTER to select.
The Size window opens.
Image 15-19
PiP window, resize
3. To keep the current aspect ratio, press ENTER to check Lock .
Once Lock is checked, the width and the height will follow each other when changing one of the dimensions.
4. Use the ▲ or ▼ key to change the height and the ◄ or ► key to change the width.
5. When the desired size is reached, press EXIT .
A Save Layout window opens.
Image 15-20
Save layout
6. Use the ▲ or ▼ key to select Yes and press ENTER to save.
Select No if you want to quit without saving the current position.
15.5.5 PiP window, position
What can be done?
The picture in picture window can be positioned on any place on the display just by changing its start coordinates. The reference is
the upper left corner of the window.
How to position
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Layout → PiP window →
Position .
162 R5906730 HDF WLP SERIES 01/08/2017