![background image](http://html1.mh-extra.com/html/barco/hdf-w22/hdf-w22_user-and-installation-manual_4170864049.webp)
3. Physical installation
3.2.6
Lens shift, zoom & focus
Via Lens key
1. Press
LENS
key on the local keypad or the remote control.
The zoom/focus menu opens.
Image 3-31
Zoom/Focus adjustment
2. Use the
▲
or
▼
key to zoom the lens.
Use the
◄
or
►
key to focus the lens.
Press
ENTER
to switch to Lens shift adjustment.
Image 3-32
Shift adjustment
3. Use the
▲
or
▼
key to shift the lens in vertical direction.
Use the
◄
or
►
key to shift the lens in horizontal direction.
Press
ENTER
to switch to zoom/focus adjustment.
Via direct access keys on the remote control
1. Press
LENS FOCUS
button [-] or [+] (C) for an overall focus of the image.
2. Press
▲
LENS SHIFT
▼
button for correct vertical position of the image on the screen.
3. Press
◄
LENS SHIFT
►
button for correct horizontal position of the image on the screen.
Take into account that the lens focus may slightly drift while the lens is warming up from cold to operation
temperature. This is a typical phenomenon for projection lenses used with high brightness projectors. The
operation temperature of the lens is reached after approximately 30 minutes projection of average video.
R5905158 HDF SERIES 08/12/2016
45
Summary of Contents for HDF W22
