![background image](http://html1.mh-extra.com/html/barco/hdf-w22/hdf-w22_user-and-installation-manual_4170864401.webp)
16. Removal and installation of the projector covers
16.6 Installation of the side cover
W
ARNING
:
This procedure may only be performed by quali
fi
ed technical service personnel.
Necessary tools
7 mm
fl
at screw driver.
How to install the side cover
1. Check if all needed
fi
lters are present.
2. Check the pressure indicated on the internal manometer of the liquid cooling circuit. This pressure should be between 0,5 and 1
bar. If the pressure is out of range, inform the responsible and quali
fi
ed technician, so he may take necessary corrective action.
1
0.5
Image 16-11
3. Install the side cover of the projector doing the following:
a) Bring the side cover towards its
fi
nal position (A),
b) then gently push the locking studs of the top corners (B) into their receivers,
c) then gently push the locking studs of the bottom corners (C) into their receivers.
Image 16-12
Mount side cover
4. Secure the side cover by locking the captive screw in the middle at the bottom of the side cover.
Image 16-13
Fixate captive screw
R5905158 HDF SERIES 08/12/2016
397
Summary of Contents for HDF W22
