![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148314.webp)
19. Board Diagnostic LED’s
19.2 Motor Control Board Diagnostic LEDs
Location of the diagnostic LEDs
7
8
9
10
11
6
5
4
12
3
2
1
Image 19-3
1
ERROR (red)
2
COMM (yellow)
3
MCB HEARTBEAT (green)
4
ERROR CH3 [spare] (red)
5
ERROR CH5/6 [focus/zoom] (red)
6
ERROR CH1 [horizontal shift] (red)
7
ERROR CH2 [vertical shift] (red)
8
ERROR CH7/8 [shutter/contrast plate] (red)
9
ERROR CH4 [spare] (red)
10
FPGA CONFIG (red)
11
+3.3V OK (green)
View on the diagnostic LEDs
The Motor Control Board is located at the left side of the projector. To view the diagnostic LEDs of the Motor Control Board the left
side cover of the projector has to be removed.
Description of the diagnostic LEDs
Ref. Description (LED
color)
Comment
1
ERROR (red)
This LED lit up in case there are communication problems. If there are repeatedly communication
problems try to reload the
fi
rmware and software of the Motor Control board. If the problems
remains replace the Motor Control Board.
2
MCB COMM (yellow)
This LED lit up each time the PMP board (which includes the Controller) communicates with the
Motor Control Board.
3
MCB HEARTBEAT
(green)
This LED
fl
ashes once a second in normal operation which indicates that the Motor Control Board
works properly. In boot mode this LED
fl
ashes twice a second.
4
ERROR CH3 (red)
Channel 3 is currently not used and thus this LED has no purpose (future expansion)
310
R5905312 HDF W SERIES 24/01/2013
Summary of Contents for HDF W series
