![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148263.webp)
15. Liquid cooling circuit
15.7 Replacement of the pump motor and rotor
When replacing the pump motor and pump rotor?
In case of an electrical failure of the pump you can replace the pump motor and pump rotor without replacing the pump house.
This way you do not have to cut the hoses from the pump house which simplify the replacement procedure. However, note that the
bearings of the pump are subject to wear. Because of that the complete pump (pump house included) has to be replaced every 4
years.
You have to order a complete pump but you only have to use the pump motor and pump rotor.
This procedure assumes that the Light Processor is removed from the projector (see chapter “Light processor
removal) and that the liquid cooling circuit” is drained (see “Draining the liquid cooling circuit”).
Necessary tools
•
3 mm Allen wrench with ball point.
•
7 mm open-end wrench.
•
PH2 Phillips screwdriver.
•
Cloths.
•
Cotton swab.
How to replace the pump motor and pump rotor
1. Disconnect the wire unit of the cooling pump.
Image 15-31
Electrical connection pump
2. Remove the four screws (reference 1) which fasten the pump house to the pump motor.
1
1
1
1
Image 15-32
Pump house,
fi
xation
3. Slide the pump house with hose backwards. Use a cloth to absorb the remaining cooling liquid.
R5905312 HDF W SERIES 24/01/2013
259
Summary of Contents for HDF W series
