![background image](http://html1.mh-extra.com/html/barco/hdf-w-series/hdf-w-series_service-manual_474148148.webp)
10. Card Cage
10.2 Removal of the Input & Communication Unit
W
ARNING
:
The procedures below may only be performed by Barco trained and quali
fi
ed technicians.
C
AUTION
:
The connector seats are fragile. Make sure to push the little tab when pulling the connector out or
the connector can get damaged.
Necessary tools
7 mm
fl
at screwdriver
How to remove the Input & Communication Unit?
1. Switch off the projector and unplug the power cord at the projector back side.
2. Ensure that no cables are connected to one of the ports of the Input & Communication Unit.
3. Remove the left projector cover.
4. Release the 4 captive screws in the corners of the Input & Communication Unit.
5. Pull the Input & Communication Unit partly out of its compartment until the hinge cylinder (reference 1) is at the right place.
6. Tip over the Input & Communication Unit.
7. Disconnect the wires:
a) Disconnect the left connector (reference 2) by pulling it out of its socket.
b) Disconnect the RGB connectors (reference 3) by pushing the little tab (reference 4) and pulling the connectors out of their
sockets.
Caution:
The connector seats are fragile. Make sure to push the little tab when pulling the connector out or the connector can
get damaged.
8. Bring the Input & Communication Unit back to a vertical position and slide it fully out of its compartment.
144
R5905312 HDF W SERIES 24/01/2013
Summary of Contents for HDF W series
