Barco Galaxy NW-7, User Manual

Page: 43 / 220

4. Installation
4.6 Controls overview
RCU
F1 F1
F2 F2
F3 F3
MENU MENU BACK BACK
ENTER ENTER
PAUSE PAUSE
AUTO IMAGE AUTO IMAGE
PC PC RGB RGB
VIDEO VIDEO
Fire Wire Fire Wire DVI DVI
IQ-PC IQ-PC SDI SDI
S-VIDEO S-VIDEO
PHASE PHASE
PIP PIP
TINT TINT
COLOR COLOR
BRIGHTN BRIGHTN
CONTR CONTR
FOCUS FOCUS
LENS LENS
ZOOM ZOOM
LENS LENS
ZOOM ZOOM
DIGI DIGI
SHIFT SHIFT
LENS LENS
VOL VOL
9
0
7
8
5 6
3 4
1 2
1
2
3
4
5
6
7
8
9
10
19
18
17
16
15
14
13
11
12
*
Image 4-35
Remote Control Unit
SOUR
CE
LENS
6
16 18
17
Image 4-36
Local keypad
The following table gives an overview of the different functionalities of the keys that can be found on the RCU:
1 Function keys Not used
2 MENU Menu key, to enter or exit the Tool bar menu
3 Address key (Recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9
4 LOGO Cycle through Focus and Convergence internal patterns
5 PAUSE To stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6
STANDBY Standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch
Attention: Switching to Standby. When the projector is running and you want to go to
standby, press the standby key for 2 seconds.
7 MUTE Not used
8 Auto image Not used
9 Digit buttons Direct input selection
10 Lens control Use these button to obtain the desired ZOOM, SHIFT, FOCUS
11 VOL Not used
12 Picture Controls Use these buttons to obtain the desired picture analog level
13 DIGI ZOOM Not used
14 FREEZ Not used
15 PIP Not used
16 ENTER To con fi rm an adjustment or selection in the menu
17 Cursor keys To make menu selections, to perform bare scale adjustments or to zoom/focus when the direct
access is active
18 BACK To leave the selected menu or item (go upwards to previous menu)
19 RCU operation
indication led Lights up when a button on the remote control is pressed. (This is a visual indicator to check
the operation of the remote control)
R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013 39