Barco Galaxy NH-12, Service Manual

Page: 84 / 146

7. Electronic parts and servicing procedures
Image 7-90
output and communication input layer: side screw
4. Disconnect the board-to-board connectors to remove the output and communication input layer from the PMP
Image 7-91
output and communication input layer: unplug the board-to-board connectors to remove
7.7.4.3.3 Installing the output and communication layer
Necessary tools
• Torx screwdriver T10
• Nut spanner 3/16”
How to install the output and communication input layer?
1. Make the board-to-board connection between output and communication input layer and PMP
Image 7-92
output and communication input layer: plug in the board-to-board connectors
2. Fix the output and communication input layer to the PMP using a screw
80 R59770141 GALAXY NH-12 20/02/2008