![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748066.webp)
7. Electronic parts and servicing procedures
Image 7-50
LPS: location of the
fi
xing screws
5. Lift the LPS to remove it
7.5.3
Installing the LPS
Necessary tools
•
Torx screwdriver T10
•
Torx screwdriver T20
•
nut spanner 10 mm
How to install the LPS?
1. Put the LPS in its correct position
2. Fix it using three
fi
xing screws
Image 7-51
LPS: location of the
fi
xing screws
3. Plug in / connect the wires
-
use two nuts M6 to
fi
x the wires to the lamp and to the SPG
-
plug in both wires coming from the mains power (Faston connectors)
-
plug in both wires coming from the engine controller (LFR + I2C)
Caution:
Pay attention to the polarity!
4. Install the lamp power cover (see concerning chapter)
5. Install the fan outlet (see concerning chapter)
6. Install the covers (see concerning chapters):
-
top cover
-
rear cover
7.5.4
Replacing the Light feedback board
Necessary tools
Trox screwdriver T10
62
R59770141 GALAXY NH-12 20/02/2008
Summary of Contents for Galaxy NH-12
