![background image](http://html1.mh-extra.com/html/barco/galaxy-nh-12/galaxy-nh-12_service-manual_3838748061.webp)
7. Electronic parts and servicing procedures
Image 7-40
X-fan cover:
fi
xing screws
4. Connect the fan X-fan to connector J404 on the X-fan supply
5. Install the covers (see concerning chapters):
-
engine fan cover 2
-
engine fan cover 1
-
top cover
-
rear cover
7.4
Lamp info receiver
Description
The
lamp info receiver
collects the data stored in the memory of the lamp and sends it to the PMP-CPU.
Necessary tools
•
Torx screwdriver T10
•
Nut spanner 5.5 mm
How to replace the lamp info receiver?
1. Remove the rear cover (see concerning chapter)
2. Remove the lamp (see concerning chapter)
3. Unplug the connectors
4. Remove both screws
fi
xing the lamp info receiver assembly
Image 7-41
Lamp info receiver:
fi
xing screws
5. Remove the lamp info receiver unit
6. Remove both screws
fi
xing the guiding pin plate
R59770141 GALAXY NH-12 20/02/2008
57
Summary of Contents for Galaxy NH-12
