Barco Galaxy NH-12, Service Manual

Page: 113 / 146

7. Electronic parts and servicing procedures
Image 7-158
Motor connector board:
fi xing screws
3. Plug in the connectors
1
2
3
4
5
Image 7-159
Motor connector board: connectors
1 microswitch left-right
2 microswitch up-down
3 motor left-right (green)
4 lens focus (orange)
5 motor up-down (black)
4. Install the covers (see concerning procedure):
- rear cover
- top cover
- engine fan cover 1
7.16 Lens shift safety switch
Introduction
For some projector lens types and using the maximum lens shift range, it could be possible that the lens edge hits the engine. To
make sure that the engine will not be damaged, a
lens shift safety switch prevents the lens from shifting any further in the actual
direction when it is touched by the lens edge. Only shifting the lens in the other direction is possible at that point.
Image 7-160
Lens shift safety switch
R59770141 GALAXY NH-12 20/02/2008 109