3. Engine replacement
screen
Image 3-50
Integrating rod: misaligned (rotation)
screen
Image 3-51
Integrating rod: misaligned (shift + rotation)
3.4.2.2
Integrating rod rotation alignment
Necessary tools
•
Philips screwdriver Ph2
•
Torx screwdriver T20
•
open ended nutspanner 7 mm
How to align the rotation of the integrating rod?
1. Remove the following parts (see concerning chapters):
-
rear cover
-
top cover
-
engine fan cover 1
2. Shift the projection lens to its nominal position (= on axis projection)
3. Project the full white internal pattern: dark borders will be visible if the rotation alignment is not correct
screen
Image 3-52
Integrating rod: rotated and in focus
4. Release both screws A and B of the integrating rod a quarter turn
28
R59770591 ENGINE KIT 26/08/2010