Barco G62-W9, User Manual

Page: 57 / 104

57 R5914653 /05 G62
PIP/BPB
Matrix
HDMI-1 HDMI-2 DVI-D 3G-SDI HDBaseT
DVI-D V V — V V
3G-SDI V V V — V
HDBaseT V V V V —
• Sub Brightness: Adjust the luminous brightness of the sub image to adapt to different ambient light.
• Sub Contrast: Adjust the contrast ratio of the sub image.
• Sub Color Space: Select a color space for the sub image.
Dynamic Range
Configure the settings for the High Dynamic Range (HDR) function.
• HDR
- Off: Turn off the projector’s HDR function, and the projector announces that it does not support HDR
content so that the input device only sends out SDR signals.
- Auto: When receiving HDR signals, the projector automatically changes to HDR display mode.
• HDR Picture Mode
- Bright: Increase the color saturation for bright images.
- Standard: Make the images look more realistic and natural.
- Film: Improve the image details for videos.
- Detail: Improve image details in dark scenes.
Low Latency
Use this function to enable/disable the system to reduce response times (input latency) during gaming.
• Normal: Without reduce the latency.
• 2D Ultra: Reduce the latency of image that can display image simutanneously.
8.11 Save to User
About save to user
Save the image settings to the User Mode. Select the correct format according to the image format, which
includes 2D Image, 3D Image, and Blending Image.
8.12 Apply to User
About apply to user
Apply the image settings to User-Presentation, User-Bright, User-Super Bright, User-Cinema, User-HDR,
User-RGB, User-DICOM SIM., User-Blending, User-3D, or User-2D High Speed.
8.13 Reset
About reset
Reset all the image settings to factory default values.
User control — Image menu