Barco G62-W9, User Manual

Page: 52 / 104

R5914653 /05 G62 52
8.1 Color Mode
About color mode
There are a number of color modes that are preset for different types of images.
• Presentation : Best for displaying presentation slides in a bright room.
• Bright : Best for the installations requiring high brightness images.
• Super Bright : Best for images with the brightness above the standard level.
• Cinema : Best for videos projected in a dark room.
• HDR : Best for displaying High Dynamic Range (HDR) content.
• sRGB : Standardized image color that matches the sRGB color standard.
• DICOM SIM. : Best for projecting monochrome medical images, such as X-ray diagram.
• Blending : Best for multiple projector installations.
• 3D : Best for playing 3D videos.
• 2D High Speed : This mode is used for displaying 2D input signal at 120Hz.
• User : Image settings saved by the user.
8.2 Brightness
About brightness
Adjust the luminous brightness of the projected image to adapt to different ambient light.
8.3 Contrast
About contrast
Adjust the contrast ratio of the projected image. The contrast controls the degree of difference between the
lightest and darkest parts of the image.
8.4 Saturation
About saturation
Adjust the intensity of the image colors.
8.5 Tint
About tint
Adjust the color balance of red and green in video images.
8.6 Sharpness
About sharpness
Adjust the clarity of details in the projected image to make the image clearer and sharper.
User control — Image menu