Barco G60 W Series, User Manual

Page: 22 / 34

R5910890 /01 G60 W series 22
The selected projector is removed from the status bar.
3.3 General settings
Start up
Select the General tab to configure the general settings for the selected projector.
1
2
3
Image 3-4
Projector Output Resolution
Choose the projector ’ s native resolution using the slider (1).
Connect Setting
Enter the IP address of the projector and click Connect (2).
The last three digits of the IP address will be the projector ’ s name.
Functional Settings
• Click Reset All to apply default settings (3).
• When a previously saved configuration file (CFG file) is opened, click Reconfigure to apply the settings to
the connected projectors.
3.4 Warp settings
Start up
Select the Warp tab to configure the warping settings for the selected projector.
Using the Warping and Blending tool