![background image](http://html1.mh-extra.com/html/barco/g60-series/g60-series_user-manual_4148306046.webp)
R5910888 /00
G60
46
A.1 Product specification of the G60-W7
Specifictions
Projector type
Single chip DLP laser phosphor projector
Resolution
1,920 x 1,200 (WUXGA)
Brightness
7,000 center lumens
Contrast ratio
1,200:1 sequential; 6,000:1 dynamic; Extreme black: 100,000:1
Brightness uniformity
85%
Aspect ratio
16:10
Lens type
G-lenses - 0.36:1 / 0.75-0.95:1 / 0.95-1.22:1 / 1.22-1.52:1 / 1.52-2.92:1 /
2.90-5.50:1
Optical lens shift
Up to 100% vertical lens shift, up to 30% horizontal lens shift. Motorized
zoom, focus, vertical and horizontal shift
Color correction
Yes
CLO (constant light output)
Yes
Light source
Laser phosphor
Light source lifetime
Up to 20,000hrs
Sealed DLP
™
core
Yes
Orientation
360° rotation, no restrictions
3D
Active stereoscopic 3D
Image processing
Embedded warp & blend possible via Ptoolset
Keystone correction
Yes
Inputs
2x HDMI 1.4 / DVI-D / HDBaseT / 3G-SDI / VGA (D-Sub 15 pin) / RJ 45
Ethernet / RS232 in
Input resolutions
Up to 1,920 x 1,200 @ 60Hz
Software tools
Projector Toolset
Control
IR, RS232, RJ45, 3.5mm phone jack for wired remote
Network connection
10/100 Ethernet, RJ45
Power requirements
100-240V / 50-60Hz
Power consumption
520W nominal, 600W maximum
BTU per hour
1,780 BTU/h nominal; 2,050 BTU/h maximum
Standby power
< 0.5W
Noise level (typical at 25°C/
77°F)
36dB(A) - 40dB(A) depending on the used mode
Operating temperature
5 - 40 °C (sea level)
Storage temperature
-10 to 60 °C
Operating humidity
10 - 85% RH, non-condensing
Storage humidity
5 - 90% RH, non-condensing
Dimensions (WxLxH)
without feet: 484 x 529 x 195 mm / 19.06 x 20.83 x 7.68 in