Barco G50, User Manual

Page: 76 / 180

R5916676 /00 G50 76
11.2 Date and Time
About date and time
Set up the date and time for the projector.
Clock mode
Set the clock mode to Use NTP Server (network-based) or Manual.
If you set the Clock Mode to Use NTP Server, make sure the projector has access to the
Internet.
Date
Set a date for the projector. The date format is in Year/Month/Date.
Time
Set the time for the projector.
Daylight Saving Time
Configure the daylight saving settings if required.
NTP Server
Select a NTP Server for the network clock mode.
Time Zone
Set a time zone for the network clock mode.
Update Interval
Set the date and time update interval.
Apply
Apply date and time modifications.
User controls — Settings menu