![background image](http://html2.mh-extra.com/html/barco/g50/g50_installation-manual_3054236048.webp)
R5916677 /00
G50
48
4.2 Power off the projector
How to power off the projector
1.
Press the
Standby
button (reference 2) on the remote control or the
Power On/Off
button (reference 3)
on the control panel.
ZOOM
2
3
Image 4–4
A confirmation request will be prompted on the screen.
2.
Press the same button again to confirm.
Note:
If not confirmed after five seconds, the confirmation request will disappear and the projector
will remain on.
CAUTION:
Don’t power on the projector again immediately after entering standby mode.
CAUTION:
Don’t switch off or disconnect the projector from the power net until the cooling down
cycle is completed.
Summary of Contents for G50
