236
FSN Series • User’s Guide
5. Menu Orientation
System Menu
•
Press
{Soft Reset Panel}
to perform a “soft” reset on the control panel only. All
stored data is preserved. After pressing the button, you will be prompted to
continue or cancel the procedure.
•
Press
{Soft Reset FSN-1400}
to perform a “soft” reset on the FSN-1400 only. All
stored data is preserved, but output video may be temporarily interrupted. After
pressing the button, you will be prompted to continue or cancel the procedure.
c~Åíçêó=aÉÑ~ìäí=pÉííáåÖë
When you perform a factory reset, the following actions occur:
•
All switcher buses are set to
BLACK
, and all transitions are set to
MIX
.
•
Output format is set to 1920 x 1080i @ 59.94.
•
All inputs on
NIC
#1 are mapped to the control panel, in a 1-1 layout to unshifted
buttons
1
through
8
. Default names are assigned, e.g.,
N1-1
,
N1-2
, etc. No other
inputs are mapped to the panel.
•
All inputs on subsequent
NIC
s are not mapped.
•
All inputs on all
UIC
s are not mapped.
•
All Ethernet communications parameters are either returned to factory default
settings or saved — depending on your selection in the
Factory Reset Pop-up
Menu
.
•
In the
Reference and Output Setup Menu
:
~
The reference input is set to
External
.
~
Output V-lock
is set to
Off
.
•
In the
Input Setup Menu
:
~
For native inputs,
Sync Mode
is set to
Auto
.
~
For universal inputs,
Auto Acquire
is set to
On
.
•
In the
User Preferences Menu
,
Black on Invalid Video
is set to
On
.
•
All color background signals (1 through 4) are set to black, as shown on the
Color
Background Menu
.
•
In the
Transition Menu
:
~
All transition
Rates
are set to
30
frames.
~
All transition curves are set to
Linear
.
•
In the
Keyer
Menus
:
~
All key
Types
are set to
Luma
.
~
All key
Fills
are set to
Self
.
~
External Key
is set to
Off
(in the
DSK
menu).
•
In the
Wipe Menu
:
~
Wipe
Direction
is set to
Normal
.
~
Wide
Edge
is set to
Soft
.
~
Edge
Width
is set to
100
.
Soft
Reset
Panel
Soft
Reset
FSN-1400
