180
FSN Series • User’s Guide
5. Menu Orientation
System Menu
•
Press
{Output Format}
to display the
Output Format Keypad
, which lists all
available output resolutions.
Figure 5-75.
Output Format Keypad
Each entry is listed using the following convention:
Format @ Fv (Hz)
. Select the
desired format and press
{Apply}
to set the system’s native resolution.
•
Press the
{Output V-Lock}
button to toggle the
Output V-Lock
mode on or off.
This button only appears when the
{Reference Input}
button is set to
External
.
~
On
— In this mode, the
{SDI Output Timing}
button appears, enabling
you to set offsets anywhere relative to the external video reference input,
with positive or negative values.
Output
Format
Select the desired output
format from the list
Apply
Close
720 x 487i @ 59.94
720 x 576i @ 50
1920 x 1080i @ 59.94
1920 x 1080i @ 50
1280 x 720p @ 59.94
1280 x 720p @ 50
Important
After you press
{Apply}
, the system displays a pop-up,
asking that you confirm or cancel the procedure.
Output
V-Lock
On
Important
When
{Output V-Lock}
is
On
, all native inputs are forced to
Frame Sync
mode, and one frame of delay will be incurred
on all native inputs. In addition, on the
Input Setup Menu
,
the
{Sync Mode}
button is grayed out. Refer to the “
” section on page 187 for more information.
