Barco Freya, User Manual

Page: 310 / 370

R5910032 /00 Freya 310
A confirmation RAID initialization window opens.
RAID initialization erases any content present on the local storage. This process can be aborted nor
reverted.
2. Are you sure to continue?
► If yes, Click Yes .
The system will restart and configure a new empty RAID storage. This operation will erase any content
already present on the local storage. This operation cannot be aborted nor reverted.
You will see the 3 HDD activity LED's blinking continuously. This means that the file system is being
initialized and can take up to 30 minutes!
It is strongly recommended NOT to power down, reset,
upgrade or ingest during that period.
The file system is completely initialized when the 3 HDD activity LED's are off.
► If no, click No to stop the process.
When mixing 1TB and 2TB drives, error messages will be displayed.
17.4.3 File system check
Location & access
Menu: Maintenance > RAID storage
Level : Administrator, Service technician
File system check
1. While in Maintenance > RAID Storage , click Check to start a file system check (reference 1).
1
2
Image 17 – 17
The system runs a file system check, reports the errors and repairs. This procedure can take several
minutes.
Verify storage partition
1. While in Maintenance > RAID Storage , click Repair to verify the storage partition table and to restore if
necessary (reference 2).
Maintenance