![background image](http://html.mh-extra.com/html/barco/flm-r20-performer/flm-r20-performer_user-manual_474095228.webp)
E. Specifications
•
Video sources CVBS, S-VIDEO, RGB and YUV [CS, CV or SOG(Y)]:
-
PAL B/D/I/G/H, PAL60, PAL M, PAL N, PAL Nc
-
NTSC M/J, NTSC 4.43
-
SECAM B/D/G/K/L
-
525i, 625i, 525p, 625p
-
Macrovision copy protection robust
-
10 bit digital output
-
Standard images “video525” and “video625”
•
Automatic detection of sync inputs but with manual override:
-
automatic modes : RGB, YUV, VIDEO
-
manual modes : RGB HS/VS - CS, RGB CV, RGB SOG, YUV HS/VS - CS, YUV CV, YUV SOY, CVBS, S-VIDEO
•
Possible to disconnect 75 Ohm terminations on HS and VS (TTL sync level selection)
•
Signal requirements:
-
Component Video (BNC)
o
R-Y : 0,7Vpp ±3dB 75 Ohm termination.
o
Ys : 1Vpp ±3dB (0,7V Luma +0,3V Sync) 75 Ohm termination.
o
B-Y : 0,7Vpp ±3dB 75 Ohm termination.
-
RG(s)B
o
R : 0,7Vpp ±3dB 75 Ohm termination.
o
G(s) : 1Vpp ±3dB (0,7Vpp G + 0,3Vpp Sync) 75 Ohm termination.
o
B : 0,7Vpp ±3dB 75 Ohm termination.
•
Diagnostic LED’s on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
E.3 Speci
fi
cations FLM HDSDI – SDI input
Input front view HDSDI – SDI input
HDSDI - SDI input
Input 1
Input 2
Loop output
Sync OK
Sel
Image E-2
Speci
fi
cations
•
SD SMPTE 259M-C and HD SMPTE 292M input data
•
2 inputs (BNC), 1 active loop-through output (BNC) of selected input
•
Automatic selection of active input with manual override
•
10 bit digital output
•
Diagnostic LED’s on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
•
SDI: 270 Mbit/s transmission (SMPTE 259M-C).
•
SDI: 525/625 interlaced.
•
Coax (75 Ohm).
224
R5976921 FLM R20+ PERFORMER 15/03/2010
Summary of Contents for FLM R20+ Performer
