Barco FL40-4K, User Manual

Page: 25 / 64

25 R5913251 /00 FS-FL40 MKII series
Procedure
When in ready mode, press the Menu button either on the remote control, or the keypad to enter the menus.
Navigate by using the arrow and OK keys, either on the remote control or the keypad.
3.5 Local keypad
About
The Keypad gives direct access to several functions, in addition to access to the menu system. The keypad
and remote control functions are equal.
The keypad has a back light that can be switched on and off manually. The light turns off automatically after a
preset time.
The Standby key is equipped with white, blue and red backlight depending on the status of the projector. See
table in
“ Power on / Standby button backlight indications ” , page 21 for info regarding this.
1 2 3 4
9 8
5
7
6
10
Image 3 – 9
Item
No.
Name
Description
1 LCD Display Shows navigation menu incl. sub menus and projector status screens
(dashboard, notification, about and preview).
2 Navigation keys Navigation arrows (up, down, left, right), confirm selection ( ✓ )
3 Menu button Toggle between OSD / Information menu.
4 Power button Power on / standby / ready
5 Back Back to previous screen.
6 OSD ON/OFF Deactivate the On Screen Display (OSD). Only critical warnings will be
displayed.
7 Input Shortcut to input source menu on LCD. Use navigation keys to select and
enable input.
8 Shutter Enable and disable the lens shutter function. This is not a mechanical shutter,
but it toggles the light source on and off. Backlight is red when the shutter are
enabled.
Getting to know the projector.