Barco FL-FS40 MKII, Installation Manual

Page: 90 / 120

R5913250 /02 FL-FS40 MKII 90
5.9 Connector panel
General
The source input panel is located at the back of the projector. For source specifications, see table below.
Image 5 – 17
Name Pcs
Description Purpose
RS-232 1 9 – pin DB9 connector For Projector Control. Allows for wired remote
control and monitoring of many projector functions
used in installation environments
Sync 3 BNC Sync Port IN/OUT;
Bidirectional mini-DIN (1x 3D
sync Out, and 2x Sync In/Out) For Projector ControlThis is mainly used in multiple
projector installations with requirement of
synchronization between the units
Trigger 2 12VDC - 0,5A (6W)
Trigger Out Voltage
No Connection
Ground
For Controlling Peripherals, like motorized
screens, curtains etc. Give 12V output when
activated. See API manual for activation info.
NOTE Disconnect the projector power cable
before connecting or removing the trigger
cable
RC 1 Jack connector for wired
remote For Projector Control
USB 2 USB 2.0 type A, 4 pin For Software upgrade
LAN 1 Standard RJ45 connector For Projector Control
DP 2 Standard display port For Projector Input
DL-DVI-D 2 Dual DVI-I 1.0 (DVI_D
Functionallity). For Projector Input. These connectors can also be
used to form one uniform image by feeding half of
the image into each connector. HDCP compliant
for sources up 165 Mhz
HDMI 1 Standard HDMI 2.0 For Projector Input
HDBaseT 1 Standard RJ45 8P8C
Connector For Projector Input
Getting to know the projector.