Barco FL-FS40 MKII, Installation Manual

Page: 73 / 120

73 R5913250 /02 FL-FS40 MKII
5.4 LCD Panel
5.4.1 LCD panel general
About
The LCD panel (See chapter 2.6, Local Keypad) is located on the right side of the projector, and has two
modes of indication; Mirror of the OSD, and Information display.
Toggle between the two indications by using the Menu button on the keypad, or on the remote control
1.
When mirroring the OSD, the LCD showing the menus and adjustment information.
2.
When in information mode, showing this Information regarding the status of the projector:
-
Projector status
- Network address and status
- Active source
- Illumination Status
- Current firmware version
- Active functions (Enabled Functions).
- Display Info, including Transport delay
- Environment Info.
Use the navigation keys (arrows) to scroll the information menu.
The time before the LCD display fades out is user configurable, see “ Backlight ” , page 101
Getting to know the projector.