Barco F90 - W13WUXGA User Manual Download Page 63

Page: 63 / 103

7. Image menu

Image 7-17
SRP Menu for 4K and WQXGA@120Hz.

This menus are only valid for projectors with COLOR colorwheel. For BRIGHT colorwheel, there is no menu choices in the SRP
menu, only SRP-Off.

(See tables below).

7.6.4

Brilliantcolor

About

Changes the color rendering, by adding secondary colors. This has the effect of increasing the color intensity, and by that also the
perceived light intensity.

Enter the menu, and select the option that give the best result

Image 7-18

This menu is only valid for COLOR colorwheel in WQXGA@60Hz mode. For BRIGHT colorwheel, there are only two choices in the
menu; Off and Native.

(See table below)

Menu choices of SRP and Brilliant Color matrix with COLOR colorwheel installed.

Valid when COLOR colorwheel is installed.

Mode

SRP

Brilliant Color

Off

Native

Off

Video

Off

Half

Native

Off

WQXGA @60Hz

Full

Native

601–426 F70 SERIES 24/10/2017

Summary of Contents for F90 - W13WUXGA








































































































Search results

Summary of Contents for F90 - W13WUXGA

Reviews:

Brands by name

Popular brands

Barco F90 - W13WUXGA, User Manual

Search results

Summary of Contents for F90 - W13WUXGA

Reviews:

Brands by name

Popular brands