![background image](http://html1.mh-extra.com/html/barco/f80-q12/f80-q12_user-manual_4243459060.webp)
R5906852 /09
F80
60
6.3 Connector settings
About connector settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display
Identification Data (EDID).
When entering the menu for each input connector, you can change the following:
•
Color Space
•
Signal Range
•
EDID
How to configure a connector
1.
Press
Menu
to activate the menus and select
Source
.
Image 6–5 Main menu, Source
2.
Press
OK
.
The
Select Source
menu is displayed with the actual available sources filled out.
3.
Scroll down to the bottom of the list of available sources and select
Connector settings
.
Image 6–6 Source menu, connector settings
The available input connectors are displayed.
Image 6–7 Example of the Connector settings menu
4.
Select the desired connector.
The connector settings menu for the selected connector will be displayed.
Summary of Contents for F80-Q12
