![background image](http://html1.mh-extra.com/html/barco/f80-4k7/f80-4k7_user-manual_474072007.webp)
1. Safety
1. SAFETY
About this document
Read this document attentively. It contains important information to prevent personal injury while installing and using the F80 pro-
jector. Furthermore, it includes several cautions to prevent damage to the F80 projector. Ensure that you understand and follow all
safety guidelines, safety instructions and warnings mentioned in this chapter before installing the F80 projector.
Clari
fi
cation of the term “F80” used in this document
When referring in this document to the term “F80” means that the content is applicable for following Barco products:
•
F80-Q7, F80-Q9, F80-4K7, F80-4K9, F80-Ultra
Model certi
fi
cation name
•
GPC
1.1
General considerations
General safety instructions
•
Before operating this equipment please read this manual thoroughly and retain it for future reference.
•
Installation and preliminary adjustments should be performed by quali
fi
ed Barco personnel or by authorized Barco service deal-
ers.
•
All warnings on the projector and in the documentation manuals should be adhered to.
•
All instructions for operating and use of this equipment must be followed precisely.
•
All local installation codes should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, as basis for National
safety regulation world wide. The safety standard covers information technology equipment including electrical business equipment
intended to operate in “normal” environments (of
fi
ces and homes). This safety standard imposes important requirements on the
use of safety critical components, materials and insulation, in order to protect the user or operator against risk of electric shock and
energy hazard and having access to live parts. Safety standards also impose limits to the internal and external temperature rises,
radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of
fi
re. Simulated single
fault condition testing reduce the risk of hazards and contribute to ensure the safety of the equipment to the user even when the
equipment’s normal operation fails.
Notice on optical radiation
This projector embeds extremely high brightness (radiance) lasers; this laser light is processed through the projectors optical path.
Native laser light is not accessible by the end user in any use case. The light exiting the projection lens has been diffused within the
optical path, representing a larger source and lower radiance value than native laser light. Nevertheless the projected light repre-
sents a signi
fi
cant risk for the human eye when exposed directly within the beam. This risk is not speci
fi
c related to the characteristics
of laser light but solely to the high thermal induced energy of the light source; which is equivalent with lamp based systems.
Thermal retinal eye injury is possible when exposed within the Hazard Distance (HD). The HD is de
fi
ned from the projection lens
surface towards the position of the projected beam where the irradiance equals the maximum permissible exposure as described in
the chapter “Hazard Distance”.
Notice on optical radiation (addendum)
•
F80-Ultra, F80-Q9, F80-4K9 :
-
The projector is Class 1 laser product that conforms with IEC EN 60825-1:2014. The projector conforms with IEC
60825–1:2007, and with performance standards for laser products under 21 CFR 1040, except with respect to those
characteristics authorized by Variance Number 2017-V-4837 effective September 13, 2017 Do not stare into Beam.
-
This projector is Risk Group 2 (RG2) according to IEC EN 62471-5. This projector may become Risk Group 3 (RG3) when an
interchangeable lens with throw ratio greater than 2.8 is installed. For Northern America, installation requirements according
to Risk group 3 (RG3) must be followed when interchangeable lens with throw ratio greater than 2.0 is installed. Refer to the
manual for the lens list and throw ratio before operation. Such combination of projector and lens are intended for professional
use only, and are not intended for consumer use. Safety considerations for RG3 projectors are discussed in section "Risk
Group 3 Safety", page 8 .
-
This projector has one or several built-in Class 4 laser clusters. Disassembly or modi
fi
cation is very dangerous and should
never be attempted.
R5906852 F80 SERIES 21/09/2017
3
Summary of Contents for F80-4K7
