1. F70 / F90-series multifunctional frame
8
Side bracket
9
Tilt adjustment knob
10
Skew adjustment knob
1.3
Before assembling the frame
Packaging
Be careful not to remove all of the cardboard when removing the rigging frame parts from the packaging. You will need the following
parts when trying to place the projector into the rigging frame.
1
2
Image 1-3
1
Two bottom cardboard pieces
2
Bendable top cardboard piece
1.4
Assembling the frame
Necessary tools
•
Torque wrench with large 17 mm hex socket
•
Allen wrench 3 mm
•
Allen wrench 6 mm
•
Orientation rod + nut M3
•
High strength threadlocker (e.g. Loctite 262)
Necessary parts
•
Bottom frame
•
Top frame
•
Vertical pro
fi
le (x4)
•
Top stacking pin (x4)
•
Bottom stacking pin (4x)
•
Stacking screw (x8)
•
Set screw M6 (x8)
•
Support frame
•
Hex screw with socket head M8 x 20 (x11)
•
Plain washer M8 (x4)
How to assemble the rigging frame
1. Lay out the bottom frame as illustrated.
4
R5906768 F70 / F90 MULTIFUNCTIONAL FRAME 22/11/2017
