Barco F70 - 4K6, User Manual

Page: 30 / 136

601 – 426-03 F70 Series 30
When mirroring the OSD, the LCD showing the menus and adjustment information.
2.
When in information mode, showing this Information regarding the status of the projector:
• Projector status
• Network address and status
• Active source
• Illumination Status
• Current firmware version
• Active functions (Enabled Functions).
• Display Info, including Transport delay
• Environment Info.
Use the navigation keys (arrows) to scroll the information menu.
When in information mode, press OK (confirm selection ( ✓ )) to see notifications and warnings.
The LCD Display will fade out 15 seconds after the last key operation.
2.6 Local keypad
About
The Keypad gives direct access to several functions, in addition to access to the menu system. The keypad
and remote control functions are equal.
The keypad has a back light that can be switched on and off manually. The light turns off automatically after a
preset time.
The Standby key is equipped with white, blue and red backlight depending on the status of the projector. See
table in
“ Power on / Standby button backlight indications ” , page 29 for info regarding this.
1 2 3 4
9 8
5
7
6
10
Image 2-3
Item
No.
Name
Description
1 LCD Display Shows Projector status and navigation menu.
2 Navigation keys Navigation arrows (up, down, left, right), confirm selection ( ✓ )
3 Menu button Toggle between OSD / Information menu.
4 Standby Power on / standby
5 Back Undo action / back to previous screen.
Getting to know the projector.