Barco F400, User Manual

Page: 58 / 220

R5915525 /00 Fx400 Series 58
The Select Source menu is displayed with the actual available sources filled out, including all available
stitched layout options.
Image 6–4 Example of the stitched layout options
3. Select the desired stitched input.
6.3 Connector Settings
About Connector Settings
The Connector Settings menu allows you to change settings for each input connector of the projector.
By default all options for every connector are set to automatic, together with the native Extended Display
Identification Data (EDID).
When entering the menu for each input connector, you can change the following:
• Color Space
• Signal Range
• EDID
• Image adjustment override configuration
How to configure a connector
1. Press Menu to activate the menus and select Source .
Image 6–5 Main menu, Source
2. Press OK .
The Select Source menu is displayed with the actual available sources filled out.
3. Select Connector Settings and click OK .
GUI – Source