![background image](http://html1.mh-extra.com/html/barco/f400/f400_user-manual_4464058028.webp)
R5915525 /00
Fx400 Series
28
1
Button pressed indicator
2
Shutter open
3
Shutter close
4
LCD/Touch panel on / off
5
Projector OSD on / off
6
Lens zoom
7
Lens shift
8
Menu open / close
9
Menu selection, OK button
10
Menu navigation
11
Input selection
12
Address button
13
Numeric buttons
14
Backspace (while entering values)
15
XLR connector
16
Decimal mark (while entering values)
17
Macro button (Not in use)
18
Menu back
19
Default value button
20
Lens focus
21
RGB filter
22
Test patterns
23
Power on
24
Power off
25
3.5 mm jack
26
RCU on / off
2.5 Pulse RCU, function of the “button pressed
indicator”
Functions button pressed indicator
•
Rapidly flashes when commands are sent, this is the normal “button pressed” indication.
•
1 Short flash when remote control is switched ON by means of the on/off button.
•
Continuously lit (up to 5 seconds) when address digits are expected after pressing the ADDR button.
•
Slowly flashes (2 times a second) when the battery level is becoming low; typically when more than 85% of
the useful life is past.
2.6 Pulse RCU, function of the “RGB filter” button
Filtering the color of the projected image
By pressing the RGB filter button on the RCU you can place a color filter on the output of the projector. This
feature can be useful during the installation and configuration of a multi-projector or multi-channel setup. By
having one projector project a red image and another project a green image, it is easier to spot and adjust the
overlap section.
By pressing this button multiple times, you will have different active filters, in the following cycle:
•
Red + Green + Blue (default)
•
Red only
•
Green only
•
Blue only
•
Red + Green
•
Green + Blue
•
Red + Blue
•
Red + Green + Blue
•
etc
After powering up, the colors will always revert back to full RGB.
2.7 Using the mini-jack connector of the RCU
Connecting a cable with the mini-jack connector will reset the broadcast address of the RCU to its
default value '0'.
How to use the mini-jack connector
1.
Connect a cable with the mini-jack connector (reference 2
) of the RCU.
Summary of Contents for F400
