Barco F400, User Manual

Page: 24 / 220

R5915525 /00 Fx400 Series 24
2.1 Basic remote control unit
About the basic remote
In order to make sure you can control your projector remotely, Barco has provided a basic remote control unit
in case the Pulse RCU is not available to you. While this remote control has a more limited amount of available
features, it will be able to help you out with basic controls.
Batteries are no longer included in the packaging. It is up to the user to purchase the correct
batteries.
Use 2 AAA size (alkaline) batteries in the remote control.
Battery placement & replacement
The wireless remote control is powered by two (2) standard AAA batteries. The needed batteries are not
included in the packaging. The user has to buy batteries himself.
The battery compartment is on the back side of the remote control. The following image illustrates how to open
the battery compartment.
Image 2–1 How to open the battery compartment of the remote
CAUTION: Replace batteries with the correct battery type. Only use AAA size batteries. There is a
risk of explosion if the battery is replaced with an incorrect type.
Make sure the polarities match the + and - marks, as depicted on the inside of the battery
compartment. There is a risk of explosion if the batteries are installed incorrectly.
Remote Control Unit