Barco F400, User Manual

Page: 153 / 220

153 R5915525 /00 Fx400 Series
11.2 Advanced Settings – RealColor calibration
CAUTION: The native colors have been measured and set during factory production. Do not change
them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a
P7 calibration ,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
Activating the calibration mode
1. In the main menu, navigate to Settings → Maintenance → Advanced while you are logged in.
Image 11–5 Maintenance menu, Advanced
2. In the Advanced Settings menu, select Native RealColor .
Image 11–6 Advanced Settings, Native Realcolor
The RealColor calibration menu is displayed.
Image 11–7 Real color calibration menu
3. Select Calibration mode and click OK to change the Calibration mode status.
Gray slider: calibration mode disabled
Blue slider: calibration mode enabled.
How to adjust the P7 native settings
1. Once the calibration mode is activated, select the desired value, click OK to activate, change with the up
and down keys and confirm by clicking OK .
GUI – Advanced settings