Barco F400, User Manual

Page: 134 / 220

R5915525 /00 Fx400 Series 134
10.1.3.3 LAN over HDBaseT TM IP address set up
About LAN over HDBaseT TM
When a LAN cable is mounted in the HDBaseT TM input, the HDBaseT TM menu will appear in the Settings
menu. Using the menu, you can assign a custom IP address, or leave the automatic IP address setup.
Keep into account that the HDBaseT TM network will be unavailable if the projector is in Standby
mode or ECO mode (whichever is applicable to your projector). If you want to use this connector as
your main network connection, it is thus advised to disable the standby or ECO mode. For more info,
see power settings.
How to automatically set up the IP address
1. In the main menu, select Settings → Communication → HDBaseT TM .
Image 10–14 Communication menu, HDBaseT TM
The HDBaseT TM menu is displayed.
Image 10–15 Example of the HDBaseT TM menu
2. To enable Automatic, make sure the Automatic slider is set to the right. The color of the slider will be blue.
An IP address will be automatically assigned if it can make a connection to the network..
When connected, it is indicated with the connection symbol and the indication Connected .
3. Select APPLY and confirm.
How to manually set up the IP address
1. In the main menu, select Settings → Communication → HDBaseT TM .
Image 10–16 Communication menu, HDBaseT TM
GUI – System Settings