Barco Event Master E2, User Manual

Page: 242 / 307

10. Maintenance
10.18 Solid-State Memory
Image 10-41
Before you proceed removing the Solid State Memory you need to remove the Bottom Panel as outlined in the
related procedure.
The solid-state memory can also be replaced after the System Power board is removed from the unit.
Overview
Image 10-42
1
System Power board
2 Solid State Memory card
3 Socket
Concerned parts
R767275K Solid State Memory
Necessary tools
1 x Phillips Screwdriver #2
How to remove the Solid State Memory
1. Remove the 2 screws that hold the memory card.
2. Carefully remove the memory card from the socket.
238 R5905948 E2 12/12/2014