Barco Event Master E2, User Manual

Page: 203 / 307

9. General operation example
9.5 Programming Menu
Overview
The programing Menu is accessed by clicking on the Programming icon on the left hand side of the screen. The area in the middle
will display a composite of the two screen destinations and the Aux destination created in the previous section.
We will assign layers and backgrounds into the screens, adjust sizing and positioning parameters, and fi nally, drop sources into the
layers.
Image 9-12
P1: You can skip this step if you don’t want thumbnail images to represent the background. In this case, the
background in the destinations area will be black and noted only by the assigned name.
P1: Select thumbnails for Background.
1. From the left hand side, click on the Background tab.
2. Next to the Refresh All Thumbnails click on the thumbnail button.
Image 9-13
3. Now, you can navigate the computer to select the desirable pic by clicking in the black square.
4. After a pic is selected, the image will fi ll the black square as shown below.
R5905948 E2 12/12/2014 199