Barco Event Master E2, User Manual

Page: 138 / 307

6. GUI orientation
6.28 Multiviewer (MVR) Menu
General
E2 includes a dedicated Multiviewer that enables multiple sources (inputs, Backgrounds, outputs) to be displayed on one or two
monitors.
Multiviewer Menu is the module used to setup the Multiviewer outputs.
Description
This menu is accessible by clicking the Multiviewer icon in the menu bar on the left side of the UI.
The three drop down menus in the title bar select the system, unit or layout displayed in the multiviewer. For release one, only one
system and one unit are supported.
The Multiviewer page is divided in four parts.
Image 6-61
1 Resources area Lists the resources available to be displayed in the
Multiviewer: Inputs, Backgrounds and Program/Preview
Destination Outputs.
2 Multiviewer Layout area The two multiviewer outputs are composed, viewed and
managed individually or as a group.
3 Modi fi er area Alignment adjustments and controls to manage the
multiviewer outputs
4 Adjustment area Color and sizing adjustments for the windows in each PIP.
The following sections describe each part of the Multiviewer page in detail:
• "Multiviewer Menu > Resource area", page 135
• "Multiviewer Menu > Multiviewer Layout area", page 136
• "Multiviewer Menu > Modi fi er area", page 138
• "Multiviewer Menu > Adjustment area", page 139
134 R5905948 E2 12/12/2014