Barco Event Master E2 Lite, User Manual

Page: 136 / 330

R5909934 /00 E2 Lite and EC-40 136
This menu provide:
• A list of the available destinations and the layers
associated with that destination.
• Swap Z order button that allows for layers that are
in the same Destination and of the same type to be
swapped.
List of destination :
• ‘ Destinations: ’ Provides list of all destinations that are available in the Programming page. Each destination
can be expanded to reveal the Background and the layers assigned to them. The “ eye ” icon replaces or
removes the layers from the Preview destination. This button works in a toggle mode.
• ‘ BG and ScreenDest: ’ Backgrounds and Destinations layers can be further expanded to reveal the A and B
sources that are used in the transitions.
• ‘ LEDs: ’ The LEDs provide an indication of the “ A ” and “ B ” backgrounds or sources.
Note that there is no A or B side of the scaler, only A and B usage, all layers are independent of each other
in respect to Z-order.
Image 6-49
Swap Z order rules
There are several rules that apply when changing Z order:
1. Can only swap Z order on layers in the same Destination.
2. Can only swap Z order on layers that are of the same type (2K / DL / 4K).
How to swap Z order
1. Click on Swap Z order button to enter in the Swap Z order mode.
2. Click on 1 layer at a time and move it to a different location.
How to access the layer adjustments
Adjustments to layers are performed in the “ Adjust ” panel:
1. Select the layer from the list
or
Select the layer from the preview canvas.
The layer is selected.
EM GUI orientation