3. Getting started
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
3-45
3.5.4
Setting display properties
Setting of desktop area and refresh frequency is available for analog graphic cards only!
If you have not yet restarted your E
OS
since installing the display driver, you have to restart
it before setting the display properties.
For setting the display properties open the
Display Properties
dialog box as described in section
. Click the
Settings
tab. Move the slider in the
Screen area
box to select the appropriate resolu-
tion of your display wall.
Click
Advanced...
to open the dialog box for the Barco graphic cards properties. To select the refresh frequency
of an analog monitor click the
Monitor
tab. In the
Monitor Settings
box click the desired refresh rate.
Click
OK
to confirm the settings in the
Display Properties
or the dialog box for the Barco graphic cards proper-
ties.
Figure 3-54
Settings tab (left) and Monitor tab (right)
