4. Operating
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
4-19
4.6.4
Displaying video and RGB signals
Control panel for Quad Analog Video Card
Figure 4-4
Xvideo control panel
C
Set contrast of video display
B
Set brightness of video display
S
Set saturation of video display
Live
Start video display
Still
Freeze video display
QAVC 1
Select video card (the cards can be renamed)
Channel 1
Select video channel (max. 4 channels; the channels can be renamed)
Encoding
Shows the detected video standard (PAL, NTSC, SECAM)
Signal
Select recording standard (VHS, S-VHS)
Fps
Select the frame rate (FULL, HALF - default)
Figure 4-5
Configuration of the video display
In the Control Panel you can adjust the video display regarding hue, saturation and brightness etc.
The video client can store these settings as well as the selected video channel in a configuration file. From the
File
menu you can choose to save the current configuration or read in other.
A certain configuration file can also be invoked as an option on the command line when starting the video client.
Please, refer to section
