3. Getting started
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
___________________________________________________________________
3-36
3.4
Configuration software
E
OS
comes to you with installed and pre-configured software. Nevertheless before you put E
OS
into operation, you
have to run through a system configuration to insert the properties of your network like the IP address and the
keyboard type. Furthermore an X.11 configuration is needed to adjust E
OS
to your local conditions.
3.4.1
System configuration
The following section describes how to change or insert the network configuration, keyboard properties, user
properties or passwords.
To change the configuration log in as
root
and start the configuration utility. The factory set password for root is
barco
:
eos login: root
Password: barco
Enter
linuxconf
.
eos:/root #
linuxconf
Navigate within the configuration window by using the
Tab
key and the
arrow
keys. A
+
in front of a folder sig-
nificates the folder is open, a
–
significates the folder is closed. Select the folder by putting the focus on it (
Arrow
up
key and
Arrow down
key) and confirming with the
Enter
key to change its state. An arrow after a word sig-
nalizes that there is a list hidden. Open the list by putting the focus on the word and pressing
<Ctrl> X
. Put
the focus on a list item to select it and confirm.
There are also help files available. Each window contains a
Help
button. The
Help
button of the main window
offers general help. The
Help
buttons of the sub windows offer help, concerning the content of the sub window.
