![background image](http://html1.mh-extra.com/html/barco/dp2k-slp-series/dp2k-slp-series_user-and-installation-manual_474005095.webp)
9. Starting up
9.2
Switching the DP2K SLP-series OFF
How to switch the DP2K SLP-series OFF?
1. Press the Standby button on the Local Keypad or use the Communicator Touch Panel to switch the projector from Light Source
ON mode to Standby mode. As a result the light source turns off while the fans keep turning to cool down the projector.
2. Allow the projector to cool down for 5 minutes minimum or until the speed of the fans decreases.
3. Switch the projector OFF with the power switch.
Tip:
Make sure no lens motors are running while switching off the projector. Wait for lens positioning to complete.
5min
Image 9-2
How to put the projector into Sleep mode?
1. Check if the light source is switched off. If not, press the Standby button on the Local Keypad or use the Communicator to switch
the light source off. The backlight color of the Standby button is red when the light source is switched off.
Note:
To put the projector into Sleep the projector must be in Standby mode (in other words the lamp must be off). If the lamp
is ignited he Sleep button is disabled notwithstanding the backlight color of the Sleep button is green.
2. Press the
SLEEP
button on the Local Keypad for three seconds or use the Communicator to put the projector into Sleep mode.
As a result the projector immediately shuts down the electronics. When the after cooling cycle of the light source is
fi
nished, the
projector will go to sleep. The backlight color of the Sleep button is red in Sleep mode even when the projector is
fi
nishing the
after cooling cycle.
Note:
Pressing the Sleep button before the after cooling cycle has
fi
nished, will restart the projector in a normal way.
R5906847 DP2K SLP SERIES 02/06/2017
91
Summary of Contents for DP2K SLP Series
