Barco DP2K-S Series, User And Installation Manual

Page: 45 / 153

7. Input & Communication
7.5 HD-SDI Input Module (optional)
Location of the source input ports
SMPTE 292/424 IN
A B
SEL
SYNC OK
SEL
SYNC OK
1 2
Image 7-5
1
SMPTE 292/424 input, port A (maximum cable length of 30 m allowed)
2 SMPTE 292/424 input, port B (maximum cable length of 30 m allowed)
SMPTE
Society of Motion Picture and Television Engineers - A global organization, based in the United States, that sets stan-
dards for baseband visual communications. This includes
fi lm as well as video standards.
HD-SDI settings
Source: 2K
General settings Advanced settings
Port Port type Mode Scan type Color
space Pixel mapping Calibration
Progressive
Progressive - fi eld bit
normal
Progressive - fi eld bit
inverted
Progressive SF - 2nd
fi eld dominant
HDSDI Single link 4:2:2 10
bits/color
Progressive SF - 1st
fi eld dominant
YCbCr HDSDI-Single link Single
3G-level A-Single link
4:2:2 12
bits/color Progressive
YCbCr
3G-level B-Dual link
3G-level A-Single link 4:4:4 10
bits/color Progressive RGB
3G-level B-Dual link
3G-level A-Single link
A or B
3GSDI link
4:4:4 12
bits/color Progressive XYZ/RGB
3G-level B-Dual link
Single
Progressive
Progressive - fi eld bit
normal
Progressive - fi eld bit
inverted
Progressive SF - 2nd
fi eld dominant
4:4:4 10
bits/color
Progressive SF- 1st
fi eld dominant
RGB
Progressive
Progressive - fi eld bit
normal
A+B HDSDI Duallink
AB
4:4:4 12
bits/color XYZ/RGB
HDSDI-Dual link Single
R5977692 DP2K-S SERIES 10/12/2012 41