![background image](http://html1.mh-extra.com/html/barco/dp2k-36blp/dp2k-36blp_user-and-installation-manual_4104727028.webp)
3. Installation process
3.3
Installation process stand alone cooler
Installation process from A to Z
1.
Assembling
of the cooling
box housing
. The housing is delivered as a
fl
at pack and should be assemble during the installation
process.
2.
Mounting of the cooler housing
on its support.
3.
Mounting the empty cooler assembly
on the stand alone frame.
4.
Insert the cooler units
and
fi
lters.
5. Establish the
hose connections
(4x) between the cooler and the projector. Connect also the four
cables
.
3.4
Software upgrade
How to upgrade the software
1. Switch on the projector. The projector can now be switched on. Place the
ON/OFF
switch of the projector in the ”I” position. As a
result the projector starts to initialize. The status lights of the projector lights up GREEN once the projector is initialized. In case
the status lights up RED may indicate a tamper event during transport. If so, contact Barco customer service.
2. Download and install the latest version of Communicator. The program can be downloaded for free from Barco’s website, (URL:
http://www.barco.com
). Click on
myBarco
and login to get access to secured information. Registration is necessary.
If you are not yet registered, click on
New to myBarco
and follow the instructions. With the created login and password, it is
possible to login where you can download the software.
3. Download the latest
fi
rmware from Barco’s website in the same way as for Communicator.
4. Start Communicator and make a connection with the projector. For more information, consult the Communicator user guide.
5. Login as service technician and click on tab
Maintenance
and select
Software update
.
6. Click on
Launch DC update companion
.
7. Click
Next
, accept the license agreement and continue following the wizard.
3.5
Starting up and adjusting the system
Adjustment steps
1.
Select the corresponding lens parameters for the installed lens
. See user guide of the
Communicator
chapter
Installation
>
Advanced
>
Lens parameters
.
2.
Alignment of the projected image on the screen
. The image can be aligned with the screen size of the application. Follow
the next steps to achieve that:
a) Press the
STANDBY
button on the Local Keypad to activate the lamp.
b) Press the
DOWSER
button on the Local Keypad to open the electronic dowser of the projector. The electronic dowser is open
if the color of the DOWSER button is GREEN.
c) Press the
TEST PATTERN
button on the Local Keypad to project one of the internal test patterns of the projector on the
screen.
d) Perform a “
Lens Homing
”. See user guide of the Communicator.
e) Use the lens
ZOOM
,
SHIFT
and
FOCUS
buttons on the Local Keypad to match the projected image with the screen. Tilt the
projector in case you can not SHIFT the image completely upon the screen. See "Lens shift, zoom & focus", page 69.
See chapter "Local keypad of the DPxK-xxBLP ", page 80, for detailed description of the Local Keypad buttons.
3.
Adjusting the light path
. Normally the lens holder and the convergence of the projector are perfectly adjusted at the factory.
Nevertheless, some applications require a readjustment of the lens holder, convergence or both. See procedure "Scheimp
adjustment", page 74, and "Convergence", page 149.
4.
Creating screen
fi
les, lens
fi
les, light sensor calibration (LSC)
fi
les, and macro
fi
les for FLAT and for SCOPE
. See user
guide of the Communicator.
5. Perform
Color calibration
. See chapter "Color calibration", page 155.
6. Create
light sensor calibration (LSC)
fi
les. See user guide of the Communicator.
7.
Backup of all projector con
fi
guration
fi
les
. See user guide of the Communicator.
8.
Registration of the projector
. The DPxK BLP series projector is DCI compliant and should be registered.
24
R5906753 DPXK BLP SERIES 20/11/2017
Summary of Contents for DP2K-36BLP
