![background image](http://html1.mh-extra.com/html/barco/dp2k-36blp/dp2k-36blp_user-and-installation-manual_4104727144.webp)
14. Maintenance
2. Blow remaining dust away with clean (without oil/lubricant) compressed air in an other room or outside. Do not hold compressor
nozzle too close to the projector
fi
lters, as this may also cause damage.
These dust
fi
lters are fragile. Clean them gently!
Mount the dust
fi
lter
1. Insert the dust
fi
lter with the “up” indication to the top of the projector.
Image 14-2
Up indication
2. Push the
fi
lter completely in.
3. Reinstall the input cover.
14.2 Remove and clean both bottom dust
fi
lters
How to remove
1. Remove the side cover.
2. Slide out the bottom front dust
fi
lter.
Image 14-3
Bottom front dust
fi
lter
3. Slide out the bottom back dust
fi
lter.
140
R5906753 DPXK BLP SERIES 20/11/2017
Summary of Contents for DP2K-36BLP
