![background image](http://html1.mh-extra.com/html/barco/dp2k-23b/dp2k-23b_installation-manual_4087425048.webp)
4. Lamp & lamp house
4.6
Resetting the lamp parameters
C
AUTION
:
The “LAMP INFO” parameters MUST be updated after each installation of an xenon lamp inside
the Lamp House. Neglecting this update will result in poor performance and short life time of the xenon lamp.
How to reset the lamp parameters?
1. Start up the projector but do not ignite the lamp.
2. Go via the
Communicator
touch panel to the menu “
Installation
” > “
Lamp
” > “
Lamp information
”.
3. While the
Lamp information
window is displayed, tap on
Reset
(1).
A reset message is displayed (2).
4. Tap on
Select
(3) to display a list of possible article numbers (4). Select a article number (5) and tap
OK
(6).
The software will validate the selected article number (7).
5. Fill out the serial number of the lamp (8).
6. Click
Reset
(9).
Image 4-24
Reset lamp info
C
AUTION
:
For more information about using the Communicator Touch Panel consult the user’s guide of the
Communicator Touch Panel.
42
R59770495 DP2K-23B 30/04/2010
Summary of Contents for DP2K-23B
