![background image](http://html1.mh-extra.com/html/barco/dp2k-20c/dp2k-20c_installation-manual_3917242124.webp)
12. Convergence
12.2 Preparing the convergence adjustment
Necessary tools
Flat blade screwdriver
Prepare projector for convergence adjustment
1. Remove all side covers and top cover of the projector, see "Removal and installation of projector covers", page 87.
2. Open the sealed compartment of the light processor, see "Open the sealed compartment", page 95.
3. Remove the convergence cover plate as follow:
a) Loosen both screws (reference 1 and 2).
b) Slide the plate forwards until all hooks at both sides of the plate become free.
c) Take off the plate.
1
2
A
B
Image 12-3
Convergence cover plate
4. Reinstall the lens and start up the projector.
5. Use the Communicator software to activate the convergence test pattern.
4
1
2
5
3
6
Image 12-4
Convergence test pattern
118
R59770351 DP2K-20C 02/02/2010
Summary of Contents for DP2K--20C
