Barco DP2K-12C, Service Manual

Page: 186 / 359

11. Lenses and Lens holder
11.3 Lens removal
How to remove a lens from the projector lens holder ?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle towards the “unlocked” position as
illustrated.
Image 11-7
2. Gently pull the lens out of the lens holder.
Image 11-8
Remove lens
It’s recommended to place the Lens caps of the original Lens packaging, back on both sides of the removed
Lens to protect the optics of the Lens.
It’s recommended to place the foam rubber of the original projector packaging, back into the Lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent the dust, emitted by
the foam, from entering the projector.
182 R5905043 DP2K-12C/11CX 19/02/2018