Barco DP2K-12C, Service Manual

Page: 117 / 359

6. Lamps and lamp houses
6.8 Replacement of the Lamp Info module
This procedure requires that the lamp house is removed from the projector. See procedure "Removal of the
lamp house", page 96.
Necessary tools
• 2,5 mm Allen wrench.
• 5 mm nut driver.
How to replace the Lamp Info module?
1. Remove the cover of the Lamp Info module by releasing the hexagon socket head cap screws (reference 1) as illustrated. Use
a 2,5 mm Allen wrench.
1
Image 6-30
2. Disconnect the wire unit (reference C) from the Lamp Info module as illustrated.
C
Image 6-31
3. Remove the Lamp Info module from the lamp house by releasing the four spacers (reference 2) as illustrated. Use a 5 mm nut
driver. Do not loose the isolating rings (reference 3).
R5905043 DP2K-12C/11CX 19/02/2018 113